Two-way radios Notes on installing two-way radios
On vehicles with a panoramic sliding sunroof, installing an antenna to the front or rear roof area is not permitted. On the rear fenders, it is recommended that you install the antenna on the side of the vehicle closest to the center of the road. Use Technical Specification ISO/TS 21609 (Road Vehicles - "EMCs for installation of aftermarket radio frequency transmitting equipment") when retrofitting two-way radios. Comply with the legal requirements for detachable parts. If your vehicle has installations for two-way radio equipment, use the power supply and antenna connectors provided in the pre-installation. Be sure to observe the manufacturer's supplements when installing. Two-way radio transmission output The maximum transmission output (PEAK) at the base of the antenna must not exceed the values in the following table. Frequency band and maximum transmission output The following devices can be used in the vehicle without restrictions: Two-way radios with a maximum transmission output of up to 100 mW
There are no restrictions when positioning the antenna on the outside of the vehicle for the following frequency bands:
|
Mercedes-Benz C-Class (W205) 2015 - 2021 Owners Manual > Driving: Breaking-in notes
Mercedes-AMG vehicles: observe the notes in the Supplement. Otherwise, you may fail to recognize dangers. To preserve the engine during the first 1,000 miles (1,500 km): Drive at varying road speeds and engine speeds. Drive the vehicle in drive program or . Change gear before the tachometer needle i ...